Quantcast

Massive problems with PyPI since days

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Massive problems with PyPI since days

Andreas Jung-5
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,

we encounter lots of buildout problems (triggered by various
Jenkins instances running at different hosters) similar to:

Restored 'README.txt'
Restored 'dev.cfg'
A    products
A    products/README.txt
Checked out revision 6884.
+ bin/python bootstrap.py
Downloading
http://pypi.python.org/packages/source/d/distribute/distribute-0.6.24.tar.gz
Traceback (most recent call last):
 File "bootstrap.py", line 67, in <module>
   ez['use_setuptools'](to_dir=tmpeggs, download_delay=0, no_fake=True)
 File "<string>", line 145, in use_setuptools
 File "<string>", line 124, in _do_download
 File "<string>", line 193, in download_setuptools
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 124, in urlopen
   return _opener.open(url, data, timeout)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 389, in open
   response = self._open(req, data)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 407, in _open
   '_open', req)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 367, in _call_chain
   result = func(*args)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1146, in http_open
   return self.do_open(httplib.HTTPConnection, req)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1121, in do_open
   raise URLError(err)
urllib2.URLError: <urlopen error [Errno 97] Address family not supported
by protocol>
Recording test results

Is there any severe problem with PyPI? These errors come and come.
Triggering a Jenkins manually after such a failure often results in a
successful build.

Andreas

- --
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
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=jxhs
-----END PGP SIGNATURE-----

_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig

lists.vcf (325 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Massive problems with PyPI since days

Yuval Greenfield
I get a massive ton of xmlrpclib timeouts recently as well. Even a few regular webpages are extremely slow eg:


Yuval Greenfield

On Fri, Dec 16, 2011 at 10:28 AM, Andreas Jung <[hidden email]> wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,

we encounter lots of buildout problems (triggered by various
Jenkins instances running at different hosters) similar to:

Restored 'README.txt'
Restored 'dev.cfg'
A    products
A    products/README.txt
Checked out revision 6884.
+ bin/python bootstrap.py
Downloading
http://pypi.python.org/packages/source/d/distribute/distribute-0.6.24.tar.gz
Traceback (most recent call last):
 File "bootstrap.py", line 67, in <module>
  ez['use_setuptools'](to_dir=tmpeggs, download_delay=0, no_fake=True)
 File "<string>", line 145, in use_setuptools
 File "<string>", line 124, in _do_download
 File "<string>", line 193, in download_setuptools
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 124, in urlopen
  return _opener.open(url, data, timeout)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 389, in open
  response = self._open(req, data)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 407, in _open
  '_open', req)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 367, in _call_chain
  result = func(*args)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1146, in http_open
  return self.do_open(httplib.HTTPConnection, req)
 File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1121, in do_open
  raise URLError(err)
urllib2.URLError: <urlopen error [Errno 97] Address family not supported
by protocol>
Recording test results

Is there any severe problem with PyPI? These errors come and come.
Triggering a Jenkins manually after such a failure often results in a
successful build.

Andreas

- --
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQGUBAEBAgAGBQJO6wE/AAoJEADcfz7u4AZjvdkLwIqA3dtNFig20L4sQPikEiXq
c1YNeZ8qaZTcGN3urvnVP9XXG8wGd8eebGP/Y/hwSzyvtLFxDgrx0XEmbIFgAjCL
7t1tjiHScG/rN/F8ABg0CXBHqI9sjbzJ12ZmrivmzJLhlqE/BKsEQOuAQ6ThgwmZ
2MqfxNkjWqndN8MIgvy7E1tQBH5McuEEDOdwe/uMXeXxy/jpJwiFEKqqBhMjEULN
PTxxF6RJGDJ3TiXK51dZkSJse8IcwRnm4A2mb828Ig3sfX4RTrvJ3Hl0kzyXqVl0
eH28/10Dbi67GH3uWtZ21+8kQ1WD3hGvsqTxNAoBJoPF+/2tLSmdC6WsLpa6+q/v
vdjlNOf0mvzSM5g8EiJohBsII6DDRHyEIQw9Ukf94482BNdmsiMtAf+v4za/mbw2
uZkbScBGXqeJ8fyQq//cNRz+mMaOZsXwd2pNXkXCgIlUhZAWL8E2wRBjwMCH3DFc
fozfJCJ9EINKKHHMhfWricbOkOdSOtY=
=jxhs
-----END PGP SIGNATURE-----

_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig



_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Massive problems with PyPI since days

Jim Fulton
In reply to this post by Andreas Jung-5
Are you using a mirror?

Jim

On Fri, Dec 16, 2011 at 3:28 AM, Andreas Jung <[hidden email]> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi there,
>
> we encounter lots of buildout problems (triggered by various
> Jenkins instances running at different hosters) similar to:
>
> Restored 'README.txt'
> Restored 'dev.cfg'
> A    products
> A    products/README.txt
> Checked out revision 6884.
> + bin/python bootstrap.py
> Downloading
> http://pypi.python.org/packages/source/d/distribute/distribute-0.6.24.tar.gz
> Traceback (most recent call last):
>  File "bootstrap.py", line 67, in <module>
>   ez['use_setuptools'](to_dir=tmpeggs, download_delay=0, no_fake=True)
>  File "<string>", line 145, in use_setuptools
>  File "<string>", line 124, in _do_download
>  File "<string>", line 193, in download_setuptools
>  File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 124, in urlopen
>   return _opener.open(url, data, timeout)
>  File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 389, in open
>   response = self._open(req, data)
>  File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 407, in _open
>   '_open', req)
>  File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 367, in _call_chain
>   result = func(*args)
>  File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1146, in http_open
>   return self.do_open(httplib.HTTPConnection, req)
>  File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1121, in do_open
>   raise URLError(err)
> urllib2.URLError: <urlopen error [Errno 97] Address family not supported
> by protocol>
> Recording test results
>
> Is there any severe problem with PyPI? These errors come and come.
> Triggering a Jenkins manually after such a failure often results in a
> successful build.
>
> Andreas
>
> - --
> ZOPYX Limited           | zopyx group
> Charlottenstr. 37/1     | The full-service network for Zope & Plone
> D-72070 Tübingen        | Produce & Publish
> www.zopyx.com           | www.produce-and-publish.com
> - ------------------------------------------------------------------------
> E-Publishing, Python, Zope & Plone development, Consulting
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.11 (Darwin)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iQGUBAEBAgAGBQJO6wE/AAoJEADcfz7u4AZjvdkLwIqA3dtNFig20L4sQPikEiXq
> c1YNeZ8qaZTcGN3urvnVP9XXG8wGd8eebGP/Y/hwSzyvtLFxDgrx0XEmbIFgAjCL
> 7t1tjiHScG/rN/F8ABg0CXBHqI9sjbzJ12ZmrivmzJLhlqE/BKsEQOuAQ6ThgwmZ
> 2MqfxNkjWqndN8MIgvy7E1tQBH5McuEEDOdwe/uMXeXxy/jpJwiFEKqqBhMjEULN
> PTxxF6RJGDJ3TiXK51dZkSJse8IcwRnm4A2mb828Ig3sfX4RTrvJ3Hl0kzyXqVl0
> eH28/10Dbi67GH3uWtZ21+8kQ1WD3hGvsqTxNAoBJoPF+/2tLSmdC6WsLpa6+q/v
> vdjlNOf0mvzSM5g8EiJohBsII6DDRHyEIQw9Ukf94482BNdmsiMtAf+v4za/mbw2
> uZkbScBGXqeJ8fyQq//cNRz+mMaOZsXwd2pNXkXCgIlUhZAWL8E2wRBjwMCH3DFc
> fozfJCJ9EINKKHHMhfWricbOkOdSOtY=
> =jxhs
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> Catalog-SIG mailing list
> [hidden email]
> http://mail.python.org/mailman/listinfo/catalog-sig
>



--
Jim Fulton
http://www.linkedin.com/in/jimfulton
_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Massive problems with PyPI since days

Andreas Jung-5
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

No.

Jim Fulton wrote:

> Are you using a mirror?
>
> Jim
>
> On Fri, Dec 16, 2011 at 3:28 AM, Andreas Jung <[hidden email]>
> wrote: Hi there,
>
> we encounter lots of buildout problems (triggered by various Jenkins
> instances running at different hosters) similar to:
>
> Restored 'README.txt' Restored 'dev.cfg' A    products A
> products/README.txt Checked out revision 6884. + bin/python
> bootstrap.py Downloading
> http://pypi.python.org/packages/source/d/distribute/distribute-0.6.24.tar.gz
>
>
Traceback (most recent call last):

> File "bootstrap.py", line 67, in <module>
> ez['use_setuptools'](to_dir=tmpeggs, download_delay=0, no_fake=True)
> File "<string>", line 145, in use_setuptools File "<string>", line
> 124, in _do_download File "<string>", line 193, in
> download_setuptools File
> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 124, in urlopen
> return _opener.open(url, data, timeout) File
> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 389, in open
> response = self._open(req, data) File
> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 407, in _open
> '_open', req) File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line
> 367, in _call_chain result = func(*args) File
> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1146, in
> http_open return self.do_open(httplib.HTTPConnection, req) File
> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1121, in do_open
> raise URLError(err) urllib2.URLError: <urlopen error [Errno 97]
> Address family not supported by protocol> Recording test results
>
> Is there any severe problem with PyPI? These errors come and come.
> Triggering a Jenkins manually after such a failure often results in
> a successful build.
>
> Andreas
>
>>
>> _______________________________________________ Catalog-SIG mailing
>> list [hidden email]
>> http://mail.python.org/mailman/listinfo/catalog-sig
>>
>
>
>
- --
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
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=Z/0v
-----END PGP SIGNATURE-----

_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig

lists.vcf (325 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Massive problems with PyPI since days

Richard Jones-32
I'm curious. Why were the mirrors not your first step in attempting to
address your automated buildout issues?


    Richard

On 17 December 2011 02:06, Andreas Jung <[hidden email]> wrote:

> No.
>
> Jim Fulton wrote:
>> Are you using a mirror?
>>
>> Jim
>>
>> On Fri, Dec 16, 2011 at 3:28 AM, Andreas Jung <[hidden email]>
>> wrote: Hi there,
>>
>> we encounter lots of buildout problems (triggered by various Jenkins
>> instances running at different hosters) similar to:
>>
>> Restored 'README.txt' Restored 'dev.cfg' A    products A
>> products/README.txt Checked out revision 6884. + bin/python
>> bootstrap.py Downloading
>> http://pypi.python.org/packages/source/d/distribute/distribute-0.6.24.tar.gz
>>
>>
> Traceback (most recent call last):
>> File "bootstrap.py", line 67, in <module>
>> ez['use_setuptools'](to_dir=tmpeggs, download_delay=0, no_fake=True)
>> File "<string>", line 145, in use_setuptools File "<string>", line
>> 124, in _do_download File "<string>", line 193, in
>> download_setuptools File
>> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 124, in urlopen
>> return _opener.open(url, data, timeout) File
>> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 389, in open
>> response = self._open(req, data) File
>> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 407, in _open
>> '_open', req) File "/opt/python/2.6.4/lib/python2.6/urllib2.py", line
>> 367, in _call_chain result = func(*args) File
>> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1146, in
>> http_open return self.do_open(httplib.HTTPConnection, req) File
>> "/opt/python/2.6.4/lib/python2.6/urllib2.py", line 1121, in do_open
>> raise URLError(err) urllib2.URLError: <urlopen error [Errno 97]
>> Address family not supported by protocol> Recording test results
>>
>> Is there any severe problem with PyPI? These errors come and come.
>> Triggering a Jenkins manually after such a failure often results in
>> a successful build.
>>
>> Andreas
>>
>>>
>>> _______________________________________________ Catalog-SIG mailing
>>> list [hidden email]
>>> http://mail.python.org/mailman/listinfo/catalog-sig
>>>
>>
>>
>>
>
> - --
> ZOPYX Limited           | zopyx group
> Charlottenstr. 37/1     | The full-service network for Zope & Plone
> D-72070 Tübingen        | Produce & Publish
> www.zopyx.com           | www.produce-and-publish.com
> - ------------------------------------------------------------------------
> E-Publishing, Python, Zope & Plone development, Consulting
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.11 (Darwin)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iQGUBAEBAgAGBQJO615eAAoJEADcfz7u4AZjwN8LwMoQjJE0vOSU8Fa2Bz+EgAp0
> cE3HOY/yiesXkM9IycmFrxJYd96AHv7f4PE5vvABALmXAXHkATwVnF6PC38Kjycs
> 72XocNKyNK4hDxS0P+/LLW4FODzoeFdBZIVSlviJujw+eOX422cEyVsgPqRJoIVF
> eLIlSWHTR7z28NaWW3dwXjoJaPzgEfDGCEVKfaehKB3x09DZxrMH478ivEd6001R
> l0ib1Xm+fF9NwCSsyGQThTzrcWvIp0WIUZUhXIzhoqqe2txvxTbHpT26TXdp3N4x
> 880MJ3Ko2xiIXEFFkgNaP3ajYZhF0K4D5urIjx861NfGps49UGYEX35y30NCEFas
> rkmmDv4y4sZB12GtSnURHzDhzkqOGfqXAFV9bATZ1AWcG7gcoN4VjnwzFmWbHiDt
> ohiw/831PBMUbBet5kheCHm8oD0jLnvWOy0mrcslikvUX+3sIJhyu1YxRRcsF9jQ
> iUe8kUwzU16YDy2DoDXk3q36uhWOyPA=
> =Z/0v
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> Catalog-SIG mailing list
> [hidden email]
> http://mail.python.org/mailman/listinfo/catalog-sig
>
_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Massive problems with PyPI since days

"Martin v. Löwis"
In reply to this post by Andreas Jung-5
> Is there any severe problem with PyPI?

There were. The e1000 card kept complaining

e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang

under heavy load. Not sure whether that's a new problem,
or just now occurring due to increased load; notably,
the problems were much reduced over this weekend.

People reported that this may be due to bugs in the Linux
e1000 driver, but none of the suggested changes (most recent
driver, various module parameters) had any positive effect.

I have now moved PyPI to a different machine (the same
as www.python.org), and see whether I can get the network
card (or perhaps the cabling) replaced. www.python.org is
a quite larger machine, so it should be able to cope with
the extra load.

Regards,
Martin
_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Massive problems with PyPI since days

Jannis Leidel-5

On 18.12.2011, at 23:06, Martin v. Löwis wrote:

>> Is there any severe problem with PyPI?
>
> There were. The e1000 card kept complaining
>
> e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
>
> under heavy load. Not sure whether that's a new problem,
> or just now occurring due to increased load; notably,
> the problems were much reduced over this weekend.
>
> People reported that this may be due to bugs in the Linux
> e1000 driver, but none of the suggested changes (most recent
> driver, various module parameters) had any positive effect.
>
> I have now moved PyPI to a different machine (the same
> as www.python.org), and see whether I can get the network
> card (or perhaps the cabling) replaced. www.python.org is
> a quite larger machine, so it should be able to cope with
> the extra load.

Ah, I wasn't able to SSH into this new box, can you transfer the accounts from ximinez to www?

Jannis
_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Massive problems with PyPI since days

Yuval Greenfield
In reply to this post by "Martin v. Löwis"
On Mon, Dec 19, 2011 at 12:06 AM, "Martin v. Löwis" <[hidden email]> wrote:
> Is there any severe problem with PyPI?

There were. The e1000 card kept complaining

e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang

under heavy load. Not sure whether that's a new problem,
or just now occurring due to increased load; notably,
the problems were much reduced over this weekend.

People reported that this may be due to bugs in the Linux
e1000 driver, but none of the suggested changes (most recent
driver, various module parameters) had any positive effect.

I have now moved PyPI to a different machine (the same
as www.python.org), and see whether I can get the network
card (or perhaps the cabling) replaced. www.python.org is
a quite larger machine, so it should be able to cope with
the extra load.



My logs show that between 2011-12-19 10:49:15 and 2011-12-19 00:58:17 (UTC) were the last PyPI errors. So it seems fixed.


Thank you,


Yuval Greenfield

_______________________________________________
Catalog-SIG mailing list
[hidden email]
http://mail.python.org/mailman/listinfo/catalog-sig
Loading...