Pyqtdeploy Qt Fails

classic Classic list List threaded Threaded
14 messages Options
Reply | Threaded
Open this post in threaded view
|

Pyqtdeploy Qt Fails

Sorin Tatah

Hello,


I'm trying to compile a pyqt5 application following the pyqtdeploy documentation but no success.

When running build-demo.py, it produces an error when qt is been configured. I have downloaded all the correct and required tarballs for demo.

Also, if i compile qt separately, it works just fine following this https://www.ics.com/blog/how-compile-qt-source-code-linux.

Running this,

python3 build-demo.py --verbose

I get the following error:

pyqtdeploy-sysroot: Execution failed: returned exit code 3

I wonder if I am missing any command configure options or libraries. Any help will be greatly Appreciated

I'm using python 3 on ubuntu 18



_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Phil Thompson-5
On 23/08/2019 14:10, Sorin Tatah wrote:
> Hello,
>
>
> I'm trying to compile a pyqt5 application following the pyqtdeploy
> documentation but no success.
> When running build-demo.py, it produces an error when qt is been
> configured.

What error?

> I have downloaded all the correct and required tarballs
> for demo.
>
> Also, if i compile qt separately, it works just fine following this
> https://www.ics.com/blog/how-compile-qt-source-code-linux.
>
> Running this,
>
> python3 build-demo.py --verbose
>
> I get the following error:
>
> *pyqtdeploy-sysroot: Execution failed: returned exit code 3*
>
> I wonder if I am missing any command configure options or libraries.
> Any help will be greatly Appreciated
>
> I'm using python 3 on ubuntu 18

_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Sorin Tatah
Hello,

When Qt is configuring, I get the following about half way through the configuration

pyqtdeploy-sysroot: Execution failed: returned exit code 3

On Fri, Aug 23, 2019, at 9:28 AM, Phil Thompson wrote:
On 23/08/2019 14:10, Sorin Tatah wrote:
> Hello,


> I'm trying to compile a pyqt5 application following the pyqtdeploy
> documentation but no success.
> When running build-demo.py, it produces an error when qt is been
> configured.

What error?

> I have downloaded all the correct and required tarballs
> for demo.

> Also, if i compile qt separately, it works just fine following this
> https://www.ics.com/blog/how-compile-qt-source-code-linux.

> Running this,

> python3 build-demo.py --verbose

> I get the following error:

> *pyqtdeploy-sysroot: Execution failed: returned exit code 3*

> I wonder if I am missing any command configure options or libraries.
> Any help will be greatly Appreciated

> I'm using python 3 on ubuntu 18




_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Phil Thompson-5
On 23/08/2019 14:59, Sorin Tatah wrote:
> Hello,
>
> When Qt is configuring, I get the following about half way through the
> configuration
>
> *pyqtdeploy-sysroot: Execution failed: returned exit code 3*

That's just telling you that a C/C++ program aborted. What was the Qt
configuration doing at the time?

Phil
_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Sorin Tatah
It happens every time it starts to list the Build Options after the Configure Summary. I have ran it multiple times and it always exits at the Build Option section

On Fri, Aug 23, 2019, at 10:06 AM, Phil Thompson wrote:
On 23/08/2019 14:59, Sorin Tatah wrote:
> Hello,

> When Qt is configuring, I get the following about half way through the
> configuration

> *pyqtdeploy-sysroot: Execution failed: returned exit code 3*

That's just telling you that a C/C++ program aborted. What was the Qt 
configuration doing at the time?

Phil



_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Sorin Tatah
In reply to this post by Phil Thompson-5
Also, if I compile qt separately, it does it fine without any errors. Only when i do it through pyqtdeploy does it fail at the build option section

On Fri, Aug 23, 2019, at 10:06 AM, Phil Thompson wrote:
On 23/08/2019 14:59, Sorin Tatah wrote:
> Hello,

> When Qt is configuring, I get the following about half way through the
> configuration

> *pyqtdeploy-sysroot: Execution failed: returned exit code 3*

That's just telling you that a C/C++ program aborted. What was the Qt 
configuration doing at the time?

Phil



_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Phil Thompson-5
In reply to this post by Sorin Tatah
On 23/08/2019 15:11, Sorin Tatah wrote:
> It happens every time it starts to list the Build Options after the
> Configure Summary. I have ran it multiple times and it always exits at
> the Build Option section

What messages was Qt's configure displaying prior to it failing?

> On Fri, Aug 23, 2019, at 10:06 AM, Phil Thompson wrote:
>> On 23/08/2019 14:59, Sorin Tatah wrote:
>> > Hello,
>> >
>> > When Qt is configuring, I get the following about half way through the
>> > configuration
>> >
>> > *pyqtdeploy-sysroot: Execution failed: returned exit code 3*
>>
>> That's just telling you that a C/C++ program aborted. What was the Qt
>> configuration doing at the time?
>>
>> Phil
>>

_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Sorin Tatah
It was listing out the Qt modules like Qt Core, Qt Network and so on. The one below is last thing it listed before it quit.

Qt Gui:
  Accessibility .......................... yes
  FreeType ............................... yes
    Using system FreeType ................ no
  HarfBuzz ............................... yes
    Using system HarfBuzz ................ no
  Fontconfig ............................. no
  Image formats:
    GIF .................................. yes
    ICO .................................. yes
    JPEG ................................. yes
      Using system libjpeg ............... no
    PNG .................................. yes
      Using system libpng ................ no
  EGL .................................... no
  OpenVG ................................. no
  OpenGL:
    Desktop OpenGL ....................... yes
    OpenGL ES 2.0 ........................ no
    OpenGL ES 3.0 ........................ no
    OpenGL ES 3.1 ........................ no
    OpenGL ES 3.2 ........................ no
  Vulkan ................................. no
  Session Management ..................... yes
Features used by QPA backends:
  evdev .................................. yes
  libinput ............................... no
  INTEGRITY HID .......................... no
  mtdev .................................. no
pyqtdeploy-sysroot: Execution failed: returned exit code 3


On Fri, Aug 23, 2019, at 10:59 AM, Phil Thompson wrote:
On 23/08/2019 15:11, Sorin Tatah wrote:
> It happens every time it starts to list the Build Options after the
> Configure Summary. I have ran it multiple times and it always exits at
> the Build Option section

What messages was Qt's configure displaying prior to it failing?

> On Fri, Aug 23, 2019, at 10:06 AM, Phil Thompson wrote:
>> On 23/08/2019 14:59, Sorin Tatah wrote:
>> > Hello,
>> >
>> > When Qt is configuring, I get the following about half way through the
>> > configuration
>> >
>> > *pyqtdeploy-sysroot: Execution failed: returned exit code 3*
>> 
>> That's just telling you that a C/C++ program aborted. What was the Qt
>> configuration doing at the time?
>> 
>> Phil
>> 




_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Phil Thompson-5
On 23/08/2019 16:08, Sorin Tatah wrote:

> It was listing out the Qt modules like Qt Core, Qt Network and so on.
> The one below is last thing it listed before it quit.
>
> Qt Gui:
>  Accessibility .......................... yes
>  FreeType ............................... yes
>  Using system FreeType ................ no
>  HarfBuzz ............................... yes
>  Using system HarfBuzz ................ no
>  Fontconfig ............................. no
>  Image formats:
>  GIF .................................. yes
>  ICO .................................. yes
>  JPEG ................................. yes
>  Using system libjpeg ............... no
>  PNG .................................. yes
>  Using system libpng ................ no
>  EGL .................................... no
>  OpenVG ................................. no
>  OpenGL:
>  Desktop OpenGL ....................... yes
>  OpenGL ES 2.0 ........................ no
>  OpenGL ES 3.0 ........................ no
>  OpenGL ES 3.1 ........................ no
>  OpenGL ES 3.2 ........................ no
>  Vulkan ................................. no
>  Session Management ..................... yes
> Features used by QPA backends:
>  evdev .................................. yes
>  libinput ............................... no
>  INTEGRITY HID .......................... no
>  mtdev .................................. no
> pyqtdeploy-sysroot: Execution failed: returned exit code 3

I have no idea why configure might be crashing part the way through.
I've never seen it before.

Phil
_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Sorin Tatah
Is there any other option for me to increases the terminal messages to see where it is actually crashing. Since it just quits, I have no way to debug and find out where the error is occurring.

Or what would you suggest I do in this case?

On Fri, Aug 23, 2019, at 11:34 AM, Phil Thompson wrote:
On 23/08/2019 16:08, Sorin Tatah wrote:
> It was listing out the Qt modules like Qt Core, Qt Network and so on.
> The one below is last thing it listed before it quit.

> Qt Gui:
>  Accessibility .......................... yes
>  FreeType ............................... yes
>  Using system FreeType ................ no
>  HarfBuzz ............................... yes
>  Using system HarfBuzz ................ no
>  Fontconfig ............................. no
>  Image formats:
>  GIF .................................. yes
>  ICO .................................. yes
>  JPEG ................................. yes
>  Using system libjpeg ............... no
>  PNG .................................. yes
>  Using system libpng ................ no
>  EGL .................................... no
>  OpenVG ................................. no
>  OpenGL:
>  Desktop OpenGL ....................... yes
>  OpenGL ES 2.0 ........................ no
>  OpenGL ES 3.0 ........................ no
>  OpenGL ES 3.1 ........................ no
>  OpenGL ES 3.2 ........................ no
>  Vulkan ................................. no
>  Session Management ..................... yes
> Features used by QPA backends:
>  evdev .................................. yes
>  libinput ............................... no
>  INTEGRITY HID .......................... no
>  mtdev .................................. no
> pyqtdeploy-sysroot: Execution failed: returned exit code 3

I have no idea why configure might be crashing part the way through. 
I've never seen it before.

Phil



_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Sorin Tatah
In reply to this post by Phil Thompson-5
The attachment is my terminal output if it helps.

On Fri, Aug 23, 2019, at 11:34 AM, Phil Thompson wrote:
On 23/08/2019 16:08, Sorin Tatah wrote:
> It was listing out the Qt modules like Qt Core, Qt Network and so on.
> The one below is last thing it listed before it quit.

> Qt Gui:
>  Accessibility .......................... yes
>  FreeType ............................... yes
>  Using system FreeType ................ no
>  HarfBuzz ............................... yes
>  Using system HarfBuzz ................ no
>  Fontconfig ............................. no
>  Image formats:
>  GIF .................................. yes
>  ICO .................................. yes
>  JPEG ................................. yes
>  Using system libjpeg ............... no
>  PNG .................................. yes
>  Using system libpng ................ no
>  EGL .................................... no
>  OpenVG ................................. no
>  OpenGL:
>  Desktop OpenGL ....................... yes
>  OpenGL ES 2.0 ........................ no
>  OpenGL ES 3.0 ........................ no
>  OpenGL ES 3.1 ........................ no
>  OpenGL ES 3.2 ........................ no
>  Vulkan ................................. no
>  Session Management ..................... yes
> Features used by QPA backends:
>  evdev .................................. yes
>  libinput ............................... no
>  INTEGRITY HID .......................... no
>  mtdev .................................. no
> pyqtdeploy-sysroot: Execution failed: returned exit code 3

I have no idea why configure might be crashing part the way through. 
I've never seen it before.

Phil



_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt

Terminal Output (23K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Phil Thompson-5
In reply to this post by Sorin Tatah
On 23/08/2019 16:48, Sorin Tatah wrote:
> Is there any other option for me to increases the terminal messages to
> see where it is actually crashing. Since it just quits, I have no way
> to debug and find out where the error is occurring.
>
> Or what would you suggest I do in this case?

Enable core dumps?

> On Fri, Aug 23, 2019, at 11:34 AM, Phil Thompson wrote:
>> On 23/08/2019 16:08, Sorin Tatah wrote:
>> > It was listing out the Qt modules like Qt Core, Qt Network and so on.
>> > The one below is last thing it listed before it quit.
>> >
>> > Qt Gui:
>> > Accessibility .......................... yes
>> > FreeType ............................... yes
>> > Using system FreeType ................ no
>> > HarfBuzz ............................... yes
>> > Using system HarfBuzz ................ no
>> > Fontconfig ............................. no
>> > Image formats:
>> > GIF .................................. yes
>> > ICO .................................. yes
>> > JPEG ................................. yes
>> > Using system libjpeg ............... no
>> > PNG .................................. yes
>> > Using system libpng ................ no
>> > EGL .................................... no
>> > OpenVG ................................. no
>> > OpenGL:
>> > Desktop OpenGL ....................... yes
>> > OpenGL ES 2.0 ........................ no
>> > OpenGL ES 3.0 ........................ no
>> > OpenGL ES 3.1 ........................ no
>> > OpenGL ES 3.2 ........................ no
>> > Vulkan ................................. no
>> > Session Management ..................... yes
>> > Features used by QPA backends:
>> > evdev .................................. yes
>> > libinput ............................... no
>> > INTEGRITY HID .......................... no
>> > mtdev .................................. no
>> > pyqtdeploy-sysroot: Execution failed: returned exit code 3
>>
>> I have no idea why configure might be crashing part the way through.
>> I've never seen it before.
>>
>> Phil

_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Sorin Tatah
What do you mean by Enable Core dumps

On Fri, Aug 23, 2019, at 12:18 PM, Phil Thompson wrote:
On 23/08/2019 16:48, Sorin Tatah wrote:
> Is there any other option for me to increases the terminal messages to
> see where it is actually crashing. Since it just quits, I have no way
> to debug and find out where the error is occurring.

> Or what would you suggest I do in this case?

Enable core dumps?

> On Fri, Aug 23, 2019, at 11:34 AM, Phil Thompson wrote:
>> On 23/08/2019 16:08, Sorin Tatah wrote:
>> > It was listing out the Qt modules like Qt Core, Qt Network and so on.
>> > The one below is last thing it listed before it quit.
>> >
>> > Qt Gui:
>> > Accessibility .......................... yes
>> > FreeType ............................... yes
>> > Using system FreeType ................ no
>> > HarfBuzz ............................... yes
>> > Using system HarfBuzz ................ no
>> > Fontconfig ............................. no
>> > Image formats:
>> > GIF .................................. yes
>> > ICO .................................. yes
>> > JPEG ................................. yes
>> > Using system libjpeg ............... no
>> > PNG .................................. yes
>> > Using system libpng ................ no
>> > EGL .................................... no
>> > OpenVG ................................. no
>> > OpenGL:
>> > Desktop OpenGL ....................... yes
>> > OpenGL ES 2.0 ........................ no
>> > OpenGL ES 3.0 ........................ no
>> > OpenGL ES 3.1 ........................ no
>> > OpenGL ES 3.2 ........................ no
>> > Vulkan ................................. no
>> > Session Management ..................... yes
>> > Features used by QPA backends:
>> > evdev .................................. yes
>> > libinput ............................... no
>> > INTEGRITY HID .......................... no
>> > mtdev .................................. no
>> > pyqtdeploy-sysroot: Execution failed: returned exit code 3
>> 
>> I have no idea why configure might be crashing part the way through.
>> I've never seen it before.
>> 
>> Phil




_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt
Reply | Threaded
Open this post in threaded view
|

Re: Pyqtdeploy Qt Fails

Phil Thompson-5
On 23/08/2019 17:22, Sorin Tatah wrote:
> What do you mean by Enable Core dumps

google

As I've said many times you need C/C++ development skills to use
pyqtdeploy.

> On Fri, Aug 23, 2019, at 12:18 PM, Phil Thompson wrote:
>> On 23/08/2019 16:48, Sorin Tatah wrote:
>> > Is there any other option for me to increases the terminal messages to
>> > see where it is actually crashing. Since it just quits, I have no way
>> > to debug and find out where the error is occurring.
>> >
>> > Or what would you suggest I do in this case?
>>
>> Enable core dumps?

_______________________________________________
PyQt mailing list    [hidden email]
https://www.riverbankcomputing.com/mailman/listinfo/pyqt